FAQs Frequently Asked Questions about Our Products and Solutions

Ask a Question Ask a Question

All FAQs (1757 total: showing 781-800)

How sensitive are the CSAT3A, CSAT3AH, CSAT3B, and CSAT3BH velocity measurements to sea spray in periods of high wind speed?
Does the head of the CSAT3 need to be matched with its electronic box?
Can the CSAT3B or CSAT3BH measurement frequency be changed? If so, what frequencies are supported by these sensors?
Can the connectors for a PWENC enclosure be purchased separately?
How easy is it to replace a defective component, such as a modem, from inside a prewired enclosure?
What is needed to connect a modem to a data logger?
Can the CS725 be used with a data logger that is not from Campbell Scientific?
Can the CS725 output in SDI-12 format?
Can the CS725 sensor be installed once snow is on the ground?
When should the CS725 be installed?
Does the CS725 sensor emit radiation?
How does the CS725 sensor work?
If solar panels are not feasible, what type of power supply would work well with a weather station and not require replacement for approximately a year?
If LoggerNet is running on a server behind a firewall, which firewall port needs to be opened to connect to data loggers that each have a GPRS modem and a fixed IP address?
Does the license for LoggerNet include the application in a virtualized form (App-V sequencing)?
Does LoggerNet require local administrator rights to function?
Can a data logger be configured to place a call to a PC running LoggerNet?
Is there a way for LoggerNet to send an email alert if a complete data logger failure occurs?
How can a data logger be switched out (for example, from a CR800 to a CR1000) in LoggerNet?
Does LoggerNet anywhere indicate the battery level of the connected data logger?

Previous Next